Die-cut parts

PM 420 M AL - double-sided glue dot


Product Information for PM 420 M AL - double-sided glue dot

Application:

die-cut parts for mounting of bath room hooks, towel holders, manufacturing of displays, mounting of product samples, labels, bonding on fairs and shop-fitting, in the print-finishing industry and advertising (P.O.S.), ...

The glue dots consist of a white PE-foam, coated on both sides with a synthetic rubber. They show very high initial strength and are suitable for indoor use. This product has a very good initial tack on metals, different (high energetic) plastics (e.g. ABS, Polycarbonate, rigid-PVC, acrylic glass, ...), wood, paper, cardboard, stone, glass and a good adhesion on low energetic plastics (PP, PE, ...).

Colours: white

Carrier: PE-foam

Adhesive: synthetic rubber

Liner: paper white, both sides siliconised

Total thickness: 1,0 mm

Adhesion: 20,0 N/25 mm at 20°C

Temperature range: -40° C / +75° C

Permanent
Permanent means a long-term connection between two materials which is usually not detachable without damage of the materials.
Removable
Removable means that at least one side of the adhesive tape is removable from many materials; a concrete period of time of the removability is not possible.
For outdoor use
Metal
KuHE
KuHE: high-energetic plastics (PVC, PC, ABS,...)
KuNE
KuNE: low-energetic plastics (PE, PP, PIB,...)
Wood
Paper, cardboard
Glass
Stone
Rubber
Foams
Textiles