Elastic-Bumpers

PM 1624


Product Information for PM 1624

Application:

Bumpers for doors, drawers, flaps, equipment base of household and office aids (e.g. calculators), telephones, for products made of acrylic glass (surface protection against scratching), in the display production, as spacers, ...

The elastic bumpers consist of EVA, are coated with an high-grade synthetic rubber adhesive, are transparent and abrasion-proof. They are mainly used indoor; long-term UV-rays may cause a minimum colour change of the material. The product has a good initial tack and excellent adhesion on metals, different high-energetic plastics (e.g. ABS, Polycarbonate, rigid-PVC, acrylic glass, ...), low-energetic plastics (e.g. PP, PE, ...), wood, stone and glass.

Colours: transparent

Carrier: EVA, Shorehärte A ca. 85

Adhesive: rubber

Liner: paper yellow, both sides siliconised

Thickness x Ø: 3,5 x 12,0 mm

Adhesion: 23,0 N/25 mm at 20°C

Temperature range: -40°C / +70°C (+50° C softening point)

Permanent
Permanent means a long-term connection between two materials which is usually not detachable without damage of the materials.
Removable
Removable means that at least one side of the adhesive tape is removable from many materials; a concrete period of time of the removability is not possible.
For outdoor use
Metal
KuHE
KuHE: high-energetic plastics (PVC, PC, ABS,...)
KuNE
KuNE: low-energetic plastics (PE, PP, PIB,...)
Wood
Paper, cardboard
Glass
Stone
Rubber
Foams
Textiles