V - Ribbed polyethylene lamella plug for rectangular tubes
Ribbed polyethylene (PE) lamella plug for rectangular tubes. Many intermediate sizes with circular closed lamellas available on special order - favorable prizes from 100 pieces up!
Net prices range from EUR 0.0429 to 9.5523.
Shipping exclusively via DPD, personal pick up possible.
Colours: Black, signal-white RAL 9003, traffic-grey RAL 7042
Material: Polyethylene (PE)
Lamella plugs without specifications are generally designed for a tube wall thickness of 1,5 to 2 mm. Please specifiy the wall thickness. Lamella plugs are suitable for tubes or equivalent apertures with a free inside diameter corresponding to the nominal measures with a depth not under the shaft length. Material and shaft design guarantee tight hold and easy assembly. In case of using as gliders (limited shearing strenght!) and to attain an easy assembly in tubes with larger wall thickness it is suitable to chamfering the inner diameter of the tube (app. 0,3-0,5x60°C).
Surface can be polished or spark eroded. Lamellas are circular closed or interrupted. Lamellas are not suitable for sealing against fluids.
On adequate order there is the possibility to apply your logo at short notice. Many intermediate sizes with circular closed lamellas are available as special order. Higher resistance to drop-out could be achieved by tighter insertion.