Serie PM 2978-G - double-sided tape
Thickness: 0,20 mm, glass fibre scrim
Double-sided tape PM 2978-G with glass fibre scrim, thickness: 0,20 mm, suitable for excellent stabilization of rubber profiles and sealing tapes.
Gross prices range from EUR 4.0832 to 88.1428.
Kindly note our minimum gross order amount of €13.20.
Shipping exclusively via GLS, personal pick up possible. Shipping costs »
Colors: adhesive transparent, scrim white
Carrier: glas fibre scrim
Liner: paper yellow, both sides siliconized
Total thickness: 0,20 mm
Adhesion (FINAT TM1): after 1 minute 33 N/25 mm, after 20 minutes 38 N/25 mm, after 24 hours 43 N/25 mm
Temperature resistance: -40° C / +100° C
Minimum order quantity: 2 rolls per article
Standard sizes: roll length 50 m roll width 5 - 1.000 mm
The double-sided tape consists of a glass fibre scrim, coated on both sides with a specialised rubber adhesive. It has a good resistance against ageing, but a limited durability against plasticizers. The product shows a high tear strength and low elongation. Its high tack adhesive has an excellent adhesion when attached to metal, varnish and high energy surfaces (e.g. ABS, Polycarbonate, rigid-PVC, acrylic glass, etc.), wood and paper. It has a very good adhesion to low energy surfaces (e.g. PE, PP). Due to the high coating thickness of the adhesive it is also suitable for rough and structured surfaces.
- making rubber profiles and sealing tapes self-adhesive and stabilizes them, especially for EPDM-foams (high tensile strength and low tension)
- coating of foams, felt and textile materials and foils
- materials which are difficult to bond in the print-finishing industry, etc.