SRB 180/2 - Friction-locking 90°-connector for round tubes and boards

  • tube, plate (panel)

Friction-locking 90°-connector for round tubes and boards

Net prices range from EUR 0.1883 to 1.1089.
Shipping exclusively via GLS, personal pick up possible.

Colours: Black

Material: Nylon, zinc-plated steel

Hints: Further sizes (Nominal-Ø and thickness of wall) on inquiry. Combinations SRB 90 with a smaller tube on inquiry (for example SRB 90/22x1.5/15).

Assembly information: To assemble SRB 90 and SRB 180/2 insert the connector up to the rod-stop and tighten the screw (not included) to form bond.

To assemble SRB 180 press both tubes at the pre-assembled connector and turn them against each other. High tensile strength can be achieved with low starting torque. Tensile strength is in fluenced tolerance and the inner surface of the tube. If the thread is not fully tighten (normally not necessary) when tight up later to compensate the settlement.