V - Ribbed polyethylene lamella plug for square tubes

Ribbed polyethylene (PE) lamella plug for square tubes. If needed may be imprinted with your corporate logo on short notice - favorable prizes from 100 pieces up!

Net prices range from EUR 0.0388 to 10.8557.
Shipping exclusively via GLS, personal pick up possible.

Colours: Black, signal-white RAL 9003, traffic-grey RAL 7042

Material: Polyethylene (PE)

Lamella plugs without specifications are generally designed for a tube wall thickness of 1,5 to 2 mm. Please specifiy the wall thickness. Lamella plugs are suitable for tubes or equivalent apertures with a free inside diameter corresponding to the nominal measures with a depth not under the shaft length. Material and shaft design guarantee tight hold and easy assembly. In case of using as gliders (limited shearing strength!) and to attain an easy assembly in tubes with larger wall thickness it is usable to chamfering the inner diameter of the tube (app. 0,3-0,5x60°C).

Surface can be polished or spark eroded. Lamellas are circulary closed or interrupted. Lamellas are not suitable for sealing against fluids. On adequate order there is the possibility to apply yout logo at short notice.

Many intermediate sizes with circular closed lamellas are available as special order. Higher resistance to drop-out could be achieved by tighter insertion.