VOV - Oval ribbed polyethylene lamella plug for flat tubes

Oval ribbed polyethylene (PE) lamella plug for flat tubes

Net prices range from EUR 0.0945 to 0.9528.
Shipping exclusively via GLS, personal pick up possible.

Colours: Black, signal-white RAL 9003

Material: Polyethylene (PE)

Hints for Lamella plugs for flat-oval tubes:

  • Lamella plugs without specifications are generally designed for a tube wall thickness of 1,5 to 2 mm. Please specifiy the wall thickness.
  • Surface can be polished or spark eroded.
  • Lamella plugs are suitable for tubes or equivalent apertures with a free inside diameter corresponding to the nominal measures with a depth not under the shaft length. Material and shaft design guarantee tight hold and easy assembly.
  • Lamellas are not suitable for sealing against fluids.
  • Many intermediate sizes with circular closed lamellas are available as special order.
  • Higher resistance to drop-out could be achieved by tighter insertion.
  • As special parts are also a lot of intermediate sizes available.
  • On adequate order there is the possibility to apply your logo at short notice.

Material information without obligation for PE (VLD, LD, LLD, MD, MLD, HD)

loading content...